Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Undercabinet Light
800-373-2110
LEGACY 2 Area Lights 21L, 41L, 51L
The Legacy 2 Area light is a group of premium architectural LED lights designed to illuminate parking areas, pathways, building facades, loading docks and a wide variety of other large general site lighting applications. Multiple mounting options make the Legacy 2 Area Light a versatile light for flood lighting, pole, ground and wall mounted area lighting.
* Standard in 5000K. . Universal 100-277 AC voltage (50-60 Hz)
173 Lu/W for 21L, 172 Lu/W for 41L and 51L . 20,760 Lu (21L) ; 41,280 Lu (41L) ; 51,600 Lu (51L)
* Philips Lumileds LED chips and premium SOSEN driver
* Integrated sensor receptacle
* The light distribution is field adjustable
* IP65 . Die cast aluminum housing with 2 mil dark bronze powder coat finish and heat resistant polycarbonate lens
* Power factor > 0.90
* 20KV surge protector
* EPA: 1.85 Ft2
* Total harmonic distortion <20%
* Color rendering Index >80
* Wireway enclosure is sealed with a water-tight, silicone rubber gaskeT
* 0-10V dimmablE
* Optional occupancy sensor: ANT-5-4T sold separately
* UL listed
* DLC premium listed
* IP65 “wet location” rated
* Flicker free per IEEE 1789-2015 (no observable adverse effects of flicker at 100% light output level)
* 5-year warranty on all electronics and housing
* Trunion and Slip-fitter mounting accessories are adjustable up to 90 Degrees in both directions.
Slip fitter mount (SF)
Dimensions Slip fitter 21L
A: 24.18’’ B: 31.97’’ C: 15.60’’ D: 5.15’’ Dimensions Slip fitter 41L/51L
A: 24.18’’ B: 31.97’’ C: 15.60’’ D: 6.38’’
Direct mount (DM)
Dimensions Direct Mount 21L/41L/51L
A: 24.18’’ B: 33.57’’ C: 15.60’’ D: 7.51’’
